Pins

A plumber located a pipe break in the Stockyards area of Fort Worth, Texas. The leak was on a recirculating line connected to an outdoor water heater system. The detection focused on isolating the issue to restore proper water flow and prevent further system damage.

Craftsman Plumbing installed a 50-gallon gas water heater in the Oak Cliff neighborhood of Dallas, Texas. The project involved setting up the new unit to ensure consistent hot water supply for residential use.

Craftsman Plumbing cleared a clogged bathroom sink in a Dallas commercial building using a drain snake machine, restoring proper drainage and ensuring the sink functioned reliably for daily business operations.

Craftsman Plumbing detected and repaired a bathtub drainage leak in Carrollton, Texas. Technicians replaced the damaged pipe section, restoring proper water flow and preventing further water damage.

Craftsman Plumbing winterized a residential property in Arlington, Texas, and installed a whole-house shutoff manifold. This system lets the homeowner fully drain the plumbing when needed, helping prevent pipe damage during freezing temperatures.

A plumbing technician performed a shower pan drain test on a second-story shower in Coppell, Texas. The test showed the pan had failed, resulting in active leaks and water damage.

Craftsman Plumbing installed a 40-gallon gas Bradford White water heater in Euless, Texas. The project included an emergency leak breaker, a new gas shut-off valve, a gas flex line, and a sediment trap to support safe and efficient operation.

Craftsman Plumbing replaced a Roman bathtub faucet cartridge, installed a shower head, a frost-proof hose bib, a toilet flush kit, and a sink stopper in Fort Worth, Texas. Each installation focused on ensuring fixture function and water flow reliability for residential use.

Craftsman Plumbing repaired a leaking underground copper pipe and installed a new hose bib in Dallas, Texas. The work restored water flow and improved outdoor plumbing access for the property.

Craftsman Plumbing installed two shower valves using PEX piping in Arlington, Texas. The team completed the installation efficiently, ensuring both valves functioned properly to support reliable water flow in the shower system.

A technician in Grand Prairie, Texas performed a tankless water heater flush. During the visit, they replaced damaged hot and cold service valves, eliminating active leaks and restoring safe operation of the unit.

Craftsman Plumbing replaced a secondary water heater in a home in Garland, Texas. The unit was part of a double water heater system connected to a heat pump. This work ensured continued hot water availability and system efficiency in a multi-heater household setup.

Craftsman Plumbing installed two American Standard toilets in Arlington, Texas. The team completed the installation efficiently, ensuring both units were properly fitted and fully functional. This service improved water efficiency and provided reliable performance for residential use.

Craftsman Plumbing installed a customer-provided kitchen faucet in Grand Prairie, Texas. The team connected the new fixture to the existing plumbing system, ensuring proper water flow and secure fitting. This service helped restore full kitchen sink functionality.

Craftsman Plumbing unclogged a toilet in a commercial building in Mesquite, Texas. The team restored proper drainage and ensured the restroom facilities operated without blockage, supporting continued business operations.

Craftsman Plumbing installed a 50-gallon Bradford White electric water heater at a commercial site in Dallas, Texas, ensuring reliable hot water supply year-round to support operational efficiency and reduce energy costs.

Craftsman Plumbing cleared a clogged shower drain in Preston Hollow, Dallas, Texas, restoring efficient water flow and preventing bathroom backups for improved homeowner comfort.

Craftsman Plumbing repaired a slab leak and installed a new hose bib in Irving, Texas. The team used PEX-B piping to complete the plumbing repair efficiently and ensure long-term performance.

Craftsman Plumbing installed two toilet fill valves at a commercial property in Arlington, Texas, restoring proper toilet function and ensuring consistent water flow crucial for business operations.

Craftsman Plumbing cleared a blocked shower drain in Plano, Texas, restoring water flow to prevent standing water and potential mold buildup in the shower area.

Craftsman Plumbing replaced a tubular drain line under a kitchen sink in Colleyville, Texas, removing the old assembly to restore proper drainage and prevent leaks, ensuring effective water flow in the local residential plumbing system.

A plumber in Hurst, Texas located a leak in a laundry room and identified a corroded cast iron drain line. The plumber removed the damaged section and replaced it with PVC piping to restore proper drainage.

Craftsman Plumbing completed a mainline unclog and sewer camera inspection at a commercial property in Dallas, Texas. The team cleared the blockage and used video inspection to check the sewer line for issues and ensure proper drainage.

Craftsman Plumbing replaced a cracked cast iron 90-degree fitting with a new cast iron 90-degree fitting in Coppell, Texas. This repair restored proper flow and prevented further pipe damage in the drainage system.

Craftsman Plumbing installed a new shower valve trim kit and shower head in the Bishop Arts neighborhood of Dallas, Texas. This project improved bathroom function by updating essential shower components for reliable water control and flow.

A plumber in Irving, Texas located a leak in a swimming pool at Las Calinas. The technician identified a broken PVC pipe and replaced the damaged section to stop the leak and restore proper water flow.

CRAFTSMAN PLUMBING installed a new brass bathroom faucet with tubular drainage in the Bishop Arts district of Dallas, Texas. The project included full removal of the old unit and secure connection to the existing water lines.

Craftsman Plumbing installed six new angle stops at a property in Kessler Park, Dallas, Texas. This upgrade allows shutoff control at individual fixtures, helping simplify future plumbing maintenance and improve system reliability.

CRAFTSMAN PLUMBING replaced two damaged cast-iron vent sections in a commercial building in Coppell, Texas. The repair addressed cracked and rotted piping that had caused a sewer odor inside the property.

Craftsman Plumbing installed a leak breaker on a water heater at a commercial bank in North Fort Worth, Texas. This device automatically shuts off water flow upon leak detection, preventing potential water damage and costly repairs in commercial properties.

Craftsman Plumbing installed a leak breaker on a Southlake commercial water heater, reducing water damage risk by detecting leaks early and ensuring system reliability through post-installation testing.

Craftsman Plumbing installed a leak breaker on a commercial water heater in Krum, Texas. This device helps prevent water damage by shutting off the water supply if a leak is detected. The installation improves safety and reduces maintenance risks for the building.

Craftsman Plumbing installed a leak breaker at a commercial bank in the Bishop Arts District of Dallas, Texas. The installation protects the building from water damage by stopping unexpected leaks quickly and effectively.

Craftsman Plumbing installed a leak-detection shutoff system in a commercial building in Dallas, Texas. This system helps prevent water damage by automatically stopping leaks before they spread.

Craftsman Plumbing installed a new gas control valve in Arlington, Texas. They added a shutoff valve behind the range to meet current code requirements. After installation, they tested the gas line for leaks and confirmed it was safe to restore gas service.

CRAFTSMAN PLUMBING replaced the complete sewer system under a residential home in Grand Prairie, Texas. The team installed new drain lines using schedule 40 PVC to ensure reliable wastewater flow and system function.

A plumber diagnosed a clog in the drainage system at a commercial Burlington Coat Factory in Plano, Texas. The service identified the blockage source and assessed the required steps for resolution, ensuring proper function of the store’s plumbing system.

Craftsman Plumbing cleared a clogged main sewer line at a commercial residential apartment complex in Cedar Hill, TX. The blockage was caused by grease buildup. This service restored proper drainage and prevented further sewer system disruption.

A plumber unclogged a main sewer line in Dallas, Texas that was blocked by wet wipes. They used a camera to inspect the line and discovered the city’s sewer line had separated from the home's main line underground.

Craftsman Plumbing repaired a damaged vent stack pipe and condensate line at a commercial property in Coppell, Texas. The team restored proper drainage and ventilation systems to ensure the building’s plumbing operated efficiently and safely.

Craftsman Plumbing replaced a toilet fill valve and flapper in a commercial building in Flower Mound, Texas. The service improved water flow and ensured proper toilet function.

A technician in Dallas, TX performed gas leak detection and identified a damaged line and fitting in the home’s crawl space. The crew removed the leaking section and installed new piping with secure fittings, restoring safe gas service and ensuring compliance with code.

A plumber cleared a clogged toilet at a FedEx facility in Fort Worth, TX. The service restored proper flow and helped prevent delays in facility operations. This commercial plumbing job ensured uninterrupted use of restroom facilities in a high-traffic environment.

A plumber in Dallas, TX cleared a full-home drainage backup by removing a main line blockage. The clog affected every fixture in the house. After clearing the obstruction, all drains began working properly, restoring daily plumbing use throughout the home.

CRAFTSMAN PLUMBING cleared a major drain blockage at a commercial retail store in Hurst, TX. The team restored full drainage and helped maintain daily operations without disruption. This service shows effective commercial drain cleaning for busy properties requiring prompt and lasting solutions.

A plumber installed a customer-provided kitchen faucet in Flower Mound, TX. The work included sealing water connections and ensuring smooth operation. The installation improved the kitchen's water flow and utility.

A technician identified a hot-side slab leak in a Plano, Texas home using specialized leak detection equipment. The exact location under the concrete was confirmed, and a clear repair plan was provided. Precise leak detection reduces unnecessary demolition and allows faster repair.

Craftsman Plumbing completed a whole house plumbing inspection and a sewer camera inspection in Dallas, Texas. The team checked pipes, fixtures, and sewer lines to identify any existing or potential issues throughout the home’s plumbing system.

Craftsman Plumbing installed a gas control valve in Euless, Texas. This service helps maintain safe and efficient gas flow in residential systems. Proper valve installation supports consistent gas pressure and reduces the risk of leaks.

Craftsman Plumbing installed a Moen shower valve, cartridge, and trim kit in Plano, Texas, enhancing water flow consistency and temperature reliability for improved residential shower performance.

CRAFTSMAN PLUMBING replaced a broken branch line under an apartment complex in Dallas, TX. The team removed the damaged pipe and rebuilt the section to fix drainage issues affecting multiple units and restore proper system flow.

A plumber installed a new kitchen faucet with a sprayer in the Las Colinas area of Irving, TX. The new fixture improves water control and daily function. This installation supports clean and efficient kitchen use for local homeowners.

A technician from Craftsman Plumbing inspected a tankless water heater in University Park, Dallas, TX. The system was producing repeated error codes. They identified the issue, explained the problem to the homeowner, and outlined the necessary repairs to restore reliable function and reduce the chance of future failures.

A plumber in Dallas, TX replaced a leaking angle stop behind a refrigerator in the Lower Greenville area. The damaged valve caused water damage inside the home. The contractor removed the faulty part and installed a new valve to restore water control and prevent future leaks.

A technician completed a full tankless water heater flush in Farmers Branch, TX. This service removed scale buildup to improve water flow and restore system performance. Regular flushing prevents blockages and helps maintain energy efficiency in tankless water heaters.

A plumber repaired two worn shower stems in Dallas, TX. The service included replacing damaged valve components and testing for proper function. This work restored normal water flow and temperature control in both showers, stopping all drips.

Craftsman Plumbing installed a new 50-gallon Bradford White gas water heater in Irving, Texas. This service improves hot water availability for residential use and ensures reliable performance for daily needs.

Craftsman Plumbing located a slab leak in Coppell, Texas. Technicians used plumbing diagnostics to identify the leak beneath the foundation, helping prevent potential water damage. Accurate detection ensured timely repair planning.

Craftsman Plumbing installed a new toilet supply line in Farmers Branch, Texas. The service included replacing the existing line to ensure proper water flow and leak prevention. The installation supports reliable toilet operation and meets current plumbing standards.

Craftsman Plumbing installed a 12-horsepower garbage disposal in Richardson, Texas. The service involved setting up a high-capacity unit designed for heavy kitchen waste. This installation helps improve waste management efficiency in residential kitchens.

Craftsman Plumbing installed two toilets and replaced two toilet flanges in the Highland Park neighborhood of Dallas, Texas. This project ensured proper toilet function and secure flange connections, supporting reliable plumbing performance in the home.

In Mesquite, TX, a technician replaced an old water heater with a new 50-gallon Bradford White unit. The team installed the system to code and tested all connections for safety. The upgrade now ensures consistent hot water and improved system function for the homeowner.

Craftsman Plumbing conducted a shower pan test in Arlington, TX, after the homeowner reported water damage. The test confirmed the pan was leaking. The team documented the issue and provided repair recommendations to stop further water intrusion and restore the shower’s integrity.

Craftsman Plumbing installed a new gas line in Fort Worth, TX after a roofer punctured the existing CSST line in the attic. The team removed the damaged section and replaced it with code-compliant piping, restoring safe and functional gas service to the home.

CRAFTSMAN PLUMBING cleared a major sewer clog at a commercial gym in Allen, TX. The blockage caused sewage overflow and water damage. The team restored proper drainage and stopped further damage to the facility.

A plumber in Rowlett, TX cleared rubber debris from a faucet’s supply line. The blockage had reduced water flow. After removal, the faucet and line returned to normal operation, restoring consistent water pressure and function.

Craftsman Plumbing installed a new water manifold and a whole house shut-off valve in the front yard. The team also replaced a bathroom faucet and installed ten angle stop shut-off valves in Richardson, Texas.

In Garland, TX, a plumber completed a leak test on a shower drain pan after signs of water damage appeared. The test confirmed the pan was leaking and causing structural issues. The plumber provided repair recommendations to stop further water intrusion and preserve the home’s integrity.

Craftsman Plumbing installed a 12-horsepower LUXURY LINE garbage disposal in a bathroom sink in Plano, Texas. The project improved waste removal efficiency using a high-capacity unit suited for residential plumbing systems.

Craftsman Plumbing hydrojetted a clogged kitchen sink drain in Arlington, Texas, restoring optimal water flow and eliminating stubborn debris to prevent future blockages.

Craftsman Plumbing unclogged a kitchen sewer branch line in Dallas, Texas. The team removed the blockage to restore proper drainage and prevent backup in the kitchen plumbing system.

Craftsman Plumbing repaired a leaking PVC and copper main supply line at a commercial property in Southlake, Texas. The work restored proper water flow and prevented further damage to the building’s water system.

Craftsman Plumbing unclogged a sewer main line at a commercial property in Arlington, Texas. The team cleared the blockage to restore full drainage and prevent further plumbing issues. This service ensured proper wastewater flow for the building.

Craftsman Plumbing cleared a blocked main sewer line for a customer in Cedar Hill, TX. Using drain cleaning equipment, the team removed a buildup of wet wipes that had obstructed the system. This restored normal flow and ensured the sewer line operated effectively.

Craftsman Plumbing replaced a home's main water supply line in Plano, TX using a trenchless method. Technicians installed a new 1-inch PEX pipe without excavation. They pressure-tested the line to verify there were no leaks and confirmed full water flow restoration.

Craftsman Plumbing removed a main line clog in Arlington, TX by clearing the blockage through the roof vent stack. The team restored full drainage throughout the home, ensuring proper flow and system function.

Craftsman Plumbing installed a new shower and tub valve in the Kessler Plaza neighborhood of Dallas, Texas. The team replaced an outdated system, tested for leaks, and confirmed proper function of both the tub and shower for consistent water control and reliable use.

Craftsman Plumbing cleared a blocked sink in Dallas, TX. The clog was located in the sink stopper assembly. Technicians removed the obstruction, reassembled the drain, and confirmed smooth water flow. The sink now functions correctly without drainage issues.

Craftsman Plumbing replaced a 50-gallon water heater in the Village of Oak Park neighborhood of Bedford, TX. The team installed a new unit, inspected the gas line, ensured proper venting, and completed safety testing. The new system works efficiently and delivers consistent hot water throughout the home.

Craftsman Plumbing installed a customer-provided kitchen sink in Dallas, TX. Technicians sealed and tested all drain and water connections to confirm they worked correctly and detected no leaks before the home was listed for sale.

Craftsman Plumbing completed a full-house drain unclog in Allen, TX. Technicians cleared blockages through exterior cleanouts, restored flow to all drains, and ensured the main sewer line was fully open to support long-term function.

Craftsman Plumbing installed a dedicated water line for a commercial coffee maker in Oak Lawn, Dallas, TX. This upgrade improves water flow and pressure, supporting stable daily operation for the business.

Craftsman Plumbing installed a new PEX water line through the attic and inside a wall to connect a hose bib in a backyard in Rowlett, Texas. This setup supports outdoor water access with a direct connection from the home’s main supply.

Craftsman Plumbing replaced a leaking copper pipe and damaged hose bib in Duncanville, Texas, installing new piping and an angle stop shut-off valve to ensure reliable water flow and simplify future maintenance.

Craftsman Plumbing replaced a leaking hose bib with a frost-proof model in Grand Prairie, Texas, preventing freeze damage and ensuring reliable outdoor water use during harsh winters.

Craftsman Plumbing installed a condensate pump in a commercial warehouse in the Bear Creek neighborhood of Irving, Texas. This service supports proper drainage and moisture control for HVAC systems in large buildings.

Craftsman Plumbing installed a new Moen shower valve in Irving, Texas. The installation ensures consistent water flow and reliable temperature control for the shower system. This upgrade supports long-term functionality and system efficiency in residential plumbing.

A plumber in Dallas, Texas replaced a broken 14-inch plastic fitting on a leaking water heater. The plumber installed a brass fitting to stop the leak and prevent future issues with the unit.

Craftsman Plumbing unclogged the main sewer line of a commercial building in Hurst, Texas. The team cleared the blockage to restore full drainage function. This service helped prevent further plumbing issues and ensured proper flow for the property.

Craftsman Plumbing unclogged a bathroom sink and rerouted a condensate line to the attic vent stacks in the Valley Ranch neighborhood of Irving, Texas. This service improved drainage flow and ensured proper ventilation for the HVAC system.

Craftsman Plumbing replaced a toilet handle and chain in Frisco, Texas. The service restored full flushing function and improved overall toilet performance.

Craftsman Plumbing unclogged a floor drain in Springtown, Texas. The team cleared the blockage to restore proper drainage and prevent water buildup. This service helped maintain the plumbing system and avoid damage from standing water.

Craftsman Plumbing installed a new drop ear and shower arm in Allen, Texas. This upgrade reinforced shower fixture stability and ensured leak-free water line connections for reliable daily use.

Craftsman Plumbing installed a new 50-gallon Bradford White water heater in Bedford, TX. This project replaced an old unit to improve energy efficiency and ensure consistent hot water. The installation supports long-term use with a reliable and well-known brand.

Craftsman Plumbing repaired a jammed garbage disposal in the Oak Cliff neighborhood of Dallas, Texas. The service restored normal kitchen function by clearing the blockage and ensuring safe operation of the disposal unit.

Craftsman Plumbing installed a custom PEX manifold system in Grapevine, Texas. This system lets the homeowner shut off and drain water lines quickly, helping prevent pipe damage during cold weather or long trips. It improves freeze protection and simplifies home water control.

Craftsman Plumbing installed schedule 40 double cleanouts and completed a hydrostatic test and camera inspection of the sewer system in Dallas, Texas. This service helps identify existing or potential pipe issues and ensures the sewer line functions properly.

Craftsman Plumbing installed two new faucets and connected new 14-inch water lines in Coppell, Texas, enhancing water flow efficiency and ensuring durable plumbing connections for local homeowners.

A plumber cleared a clog in a double kitchen sink in Dallas, Texas. The team accessed the system through a cleanout and removed the blockage. After the work was completed, both sinks drained properly and without delay.

Craftsman Plumbing removed a leaking AO Smith water heater in McKinney, Texas, and installed a new 50-gallon gas Bradford White unit. The work included new supply lines, a gas sediment trap, a gas supply line, and a ball valve shut-off.

A plumber in Cedar Hill, Texas cleared a severe drain clog caused by a large buildup of wet wipes. Once the blockage was removed, the drain resumed normal flow. This job highlights how even labeled "flushable" wipes can lead to significant pipe issues over time.

Craftsman Plumbing installed a new faucet and connected a drain line for a bathroom sink in Coppell, Texas. The service improved water flow and drainage by ensuring proper fixture setup in a residential bathroom.

Craftsman Plumbing detected a slab leak beneath a Dallas-area home in Rowlett, TX. Using advanced leak detection tools, they pinpointed the pipe damage and provided a tunneling repair estimate to prevent structural issues.

A plumber from Craftsman Plumbing installed a new toilet handle in Irving, Texas. The service involved replacing the old handle to improve functionality and ensure smooth flushing.

Craftsman Plumbing completed a whole house plumbing inspection and delivered a detailed plumbing report in Farmers Branch, Texas. The service checked all plumbing systems for issues and documented the findings for future maintenance or repairs.

A plumber in Dallas, Texas removed a damaged cast iron drain line hidden inside a wall. The team replaced it with new Schedule 40 PVC piping. This upgrade stopped the leak and reduced the chance of future plumbing issues.

Craftsman Plumbing installed a gas shut-off valve for a kitchen stove in Richardson, Texas, enhancing safety by enabling quick gas flow control during maintenance or appliance replacement.

Craftsman Plumbing repaired a broken cleanout at a home in Euless, Texas. The crew excavated the damaged section and replaced it to restore full drainage to the entire house, resolving a major clog affecting all plumbing fixtures.

Craftsman Plumbing installed a 13-horsepower garbage disposal from the luxury line in Irving, Texas. The team completed the installation efficiently, ensuring proper fit and function. This service supports kitchen waste management by improving disposal performance and durability for residential use.

Craftsman Plumbing replaced a bathtub faucet cartridge in Plano, Texas. The service involved removing the faulty cartridge and installing a new one to ensure proper water flow and temperature control. This repair helps prevent leaks and supports efficient faucet operation.

Craftsman Plumbing cleared a main sewer line blockage in Dallas, Texas. Technicians removed roots from the pipe, used a sewer camera to locate a break, and provided the customer with a repair estimate.

Craftsman Plumbing installed a Locke LUXURY LINE garbage disposal in a residential kitchen in Dallas, Texas. The team replaced the old unit and ensured proper connection to the drain and power. This installation improves kitchen functionality and supports efficient food waste disposal.

Craftsman Plumbing installed a 50-gallon gas Bradford White water heater in Irving, Texas. The team connected the system, secured all fittings, and ensured proper function. This service supports reliable hot water access for household use.

Craftsman Plumbing replaced a cast iron toilet flange with a new PVC toilet flange in Grand Prairie, Texas. This upgrade improves connection stability between the toilet and drainpipe, reducing the risk of leaks. PVC components offer better resistance to corrosion compared to older cast iron materials.

Craftsman Plumbing inspected a sewer system in Fort Worth, Texas, using a sewer video camera. They located a break in the line and provided the client with a repair estimate.

Craftsman Plumbing completed a hydrojet cleaning of a kitchen sink sewer branch line in Bedford, Texas. This service removed buildup and improved drainage flow. The team used high-pressure water to clean the inside of the pipe efficiently.

Craftsman Plumbing replaced a leaking tub spout in Double Oak, Texas. The service restored proper water flow and prevented further water damage in the bathroom. This plumbing repair addressed the immediate issue and improved fixture functionality.

Craftsman Plumbing efficiently cleared a clogged bathroom sink in Richardson, Texas, using a sewer snake, restoring proper drainage quickly and advising homeowners on preventing future blockages.

In Arlington, Texas, Craftsman Plumbing resolved a main line clog causing a whole house backup. Using a sewer snake, they cleared the blockage, restoring full drainage and preventing further water damage.

Craftsman Plumbing cleared clogs from two bathroom tubs in Irving, Texas. Technicians used a sewer snake to remove large amounts of hair, restoring proper water flow to both drains.

In Carrollton, Texas, Craftsman Plumbing detected a leak beneath a PVC patio slab, excavated the site, and repaired damaged PVC supply lines, effectively stopping water loss and preventing structural damage to homeowners' outdoor living areas.

Craftsman Plumbing completed a hydrostatic sewer test in Flower Mound, Texas. The test was successful, confirming the sewer system held pressure without leaks. Hydrostatic testing helps verify the integrity of sewer lines in residential and commercial properties.

Craftsman Plumbing completed a leak detection service in Carrollton, Texas. The team identified a slab leak, excavated the affected area, and repaired a leaking copper pipe beneath the foundation.

Craftsman Plumbing installed a kitchen faucet and kitchen sink in the Elmwood neighborhood of Oak Cliff, Dallas, Texas. The service included setting up new fixtures to support kitchen function and plumbing efficiency.

Craftsman Plumbing replaced two laundry washer box shut-off valves with new quarter-turn shut-off valves in Coppell, Texas. The service improved water control and upgraded aging plumbing components in the laundry area.

Craftsman Plumbing replaced an old cast iron toilet flange with a new PVC toilet flange in Euless, Texas. This service improved the connection between the toilet and drainpipe, helping ensure a secure and leak-free seal.

Craftsman Plumbing replaced an old Rheem water heater in Duncanville, Texas. The team installed a 50-gallon gas Bradford White water heater with a new gas supply line, sediment trap, water supply lines, and an emergency leak breaker.

A plumber in DeSoto, Texas replaced a faulty toilet flange that caused leaking and instability. The original flange was too high, leading to improper toilet seating. The plumber installed a new PVC flange to stop the leak and stabilize the toilet.

Craftsman Plumbing unclogged two bathroom sinks in Dallas, Texas. They used a sewer snake to remove roots from the pipes and inspected the drainage system with a sewer camera. After locating the root intrusion, they provided a repair estimate to address the damaged pipe sections.

Craftsman Plumbing installed a ball valve shut off and manifold in the Valley Ranch neighborhood of Irving, Texas. This plumbing service helps control water flow efficiently and supports future maintenance with greater ease.

Craftsman Plumbing replaced a leaking bathroom sink drain in Dallas, Texas. The team removed the damaged drainage, installed new components, and tested the system to ensure leak-free operation and long-term reliability.

Craftsman Plumbing replaced a leaking frost-proof hose bib in Garland, Texas. The leaking fixture was located inside the wall and caused water damage. The team removed the broken part and installed a new hose bib to stop further leaks and protect the wall from future water issues.

Craftsman Plumbing replaced the main water line and installed a ball valve shut-off at the front of a home in the Valley Ranch neighborhood of Irving, Texas. The team completed a full line pull to ensure proper water flow and improved system access.

Craftsman Plumbing replaced a damaged main sewer drain line in Irving, Texas. Technicians removed collapsed sections filled with roots and installed a new 4-inch schedule 40 PVC pipe with double cleanouts to ensure proper drainage. This repair restored full function to the home’s plumbing system.

Craftsman Plumbing installed a new toilet and replaced a broken toilet flange in Mesquite, Texas. The team removed the damaged flange, secured the replacement, and completed the toilet installation to restore proper function.

CRAFTSMAN PLUMBING in Garland, TX replaced a leaking angle stop shut-off valve causing interior flooding, stopping the leak promptly and helping homeowners avoid costly water damage during seasonal rains.

Craftsman Plumbing replaced a leaking shower cartridge in Dallas, Texas. The team removed the faulty component and installed a new cartridge to restore proper shower operation.

Craftsman Plumbing completed a whole house plumbing inspection in Irving, Texas. The team used a sewer camera to check the sewer line and performed a leak detection test in the master bathroom. They found the leak and gave the customer a repair estimate.

A plumber replaced a rusted cast iron toilet flange with a PVC flange in Fort Worth, Texas. This repair corrected the toilet connection and restored its proper function. The replacement improved reliability and prevented further water damage in the bathroom.

A plumber in Dallas, Texas replaced an old shower valve and restored full water flow to the shower. The service improved function and ensured reliable operation.

Craftsman Plumbing installed a new shower cartridge in a home in The Colony, located in Lewisville, Texas. This service restored proper water flow and temperature control in the shower system.

Craftsman Plumbing repaired a leaking Roman bathtub faucet in the Deep Ellum neighborhood of Dallas, Texas. The team identified the source of the leak and replaced the faulty faucet to stop ongoing and future water issues.

Craftsman Plumbing installed a frost-proof hose bib and secured a loose bathtub faucet in the Castle Hills neighborhood of Lewisville, Texas. The faucet was moving during use, and the hose bib replacement improves outdoor water access.

Craftsman Plumbing replaced a leaking gate valve shut-off with a new ball valve shut-off in the Valley Ranch neighborhood of Irving, Texas. This upgrade improves water shut-off reliability and prevents future leaks in the home's main water line.

Craftsman Plumbing replaced two outdated Rheem water heaters with two new 50-gallon gas Bradford White units in Rowlett, Texas. The team removed the old systems and completed the full installation of new heaters to ensure consistent hot water service.

Craftsman Plumbing installed two Delta shower valves, trim kits, and cartridges in Denton, TX, ensuring precise water flow and temperature control for safer, more efficient bathroom use.

Craftsman Plumbing completed a slab leak repair in Arlington, Texas. The team located the leak, tunneled to the damaged area, and replaced the old copper pipe with PEX-B piping to restore proper function.

Craftsman Plumbing repaired a leaking copper pipe inside a wall in Arlington, Texas. The team removed the damaged copper section and installed PEX-B piping to stop water damage and restore proper flow.

Craftsman Plumbing repaired a whole house clog in Irving, Texas. They identified a break and root intrusion in the existing double clean outs. The team excavated the damaged section and installed new schedule 40 PVC double clean outs to restore proper drainage.

A plumber in Little Elm, Texas replaced a faulty toilet flapper that caused continuous water flow and a high water bill. The plumbing repair stopped the leak and restored normal toilet function.